Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Italiano

Traduzione in corso passo 5

Passo 5
The EMI filter is connected by three screws. Use the T10 screwdriver to remove them. The screw that holds in both the filter and a wire that is connected to it is a different size and should be kept identifiable from the other two screws. The green and yellow wire that was held in by the different screw is tucked behind another component. To get it out, squeeze it behind the black wire and the filter will be able to be removed from the casing.
  • The EMI filter is connected by three screws. Use the T10 screwdriver to remove them.

  • The screw that holds in both the filter and a wire that is connected to it is a different size and should be kept identifiable from the other two screws.

  • The green and yellow wire that was held in by the different screw is tucked behind another component. To get it out, squeeze it behind the black wire and the filter will be able to be removed from the casing.

Il filtro EMI è tenuto fermo da 3 viti. Usa il cacciavite T10 per svitarle.

La vite che tiene fermi sia il filtro che un cavo ha delle dimensioni diverse e non va confusa con le altre 2.

Il cavo verde-giallo che era collegato dalla vite è nascosto dietro un'altra componente. Per rimuoverlo schiaccialo dietro il cavo nero e il filtro.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.