Salta al contenuto principale
Inglese
Olandese

Traduzione in corso passo 9

Passo 9
Position the new port assembly on the end cap and reinsert the 5mm T6 screw. The rubber insulation around the motherboard connector should help hold the ZIF connector in place after the screw has been reinserted.
  • Position the new port assembly on the end cap and reinsert the 5mm T6 screw.

  • The rubber insulation around the motherboard connector should help hold the ZIF connector in place after the screw has been reinserted.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.