Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Pull the top of the camera off and turn it so the bottom is facing you. Desolder the three connections from the bulb to the small circuit board. Remove the excess solder using your soldering iron and desoldering wick.
  • Pull the top of the camera off and turn it so the bottom is facing you.

  • Desolder the three connections from the bulb to the small circuit board.

  • Remove the excess solder using your soldering iron and desoldering wick.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.