Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 3

Passo 3
Each speaker is held in place with two 9mm Phillips screws. Remove the screws using the PH1 screwdriver head. If you are replacing the left speaker, remove the screws and speaker on your right.
  • Each speaker is held in place with two 9mm Phillips screws. Remove the screws using the PH1 screwdriver head.

  • If you are replacing the left speaker, remove the screws and speaker on your right.

  • If you are replacing the right speaker, remove the screws and speaker on your left.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.