Skip to main content
Inglese
Italiano

Traduzione in corso passo 1

Step 1
Use a spudger or the tip of your finger to carefully disconnect the orange click wheel ribbon from the logic board.
  • Use a spudger or the tip of your finger to carefully disconnect the orange click wheel ribbon from the logic board.

  • Careful not to dig the spudger in too deep to avoid detaching the contact on the logic board. Try to keep the spudger as close to the orange click wheel ribbon connector as possible.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.