Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Italiano

Traduzione in corso passo 15

Step 15
If you're using a replacement battery that came with pre-installed adhesive, peel off the protective tab now, exposing the adhesive. If needed, try re-using the existing adhesive to secure the battery. Alternatively, try a small piece of double-sided tape such as Tesa 61395, or a dab of liquid adhesive such as E6000. Rotate the battery down into its slot, and press it into position.
  • If you're using a replacement battery that came with pre-installed adhesive, peel off the protective tab now, exposing the adhesive.

  • If needed, try re-using the existing adhesive to secure the battery. Alternatively, try a small piece of double-sided tape such as Tesa 61395, or a dab of liquid adhesive such as E6000.

  • Rotate the battery down into its slot, and press it into position.

  • Press the battery down against the system board to re-adhere it in place.

  • Now is the best time to test powering on your watch—if it doesn't turn on, double check all three connectors and try again.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.