Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Spagnolo

Traduzione in corso passo 6

Passo 6
Roll the opening pick up the side of the button side of the watch, gently pushing in to separate the adhesive and widening the gap as you go. Remember not to push the pick in too far—it's easier to avoid this by rolling the pick, rather than dragging a tip along. Remember not to push the pick in too far—it's easier to avoid this by rolling the pick, rather than dragging a tip along.
  • Roll the opening pick up the side of the button side of the watch, gently pushing in to separate the adhesive and widening the gap as you go.

  • Remember not to push the pick in too far—it's easier to avoid this by rolling the pick, rather than dragging a tip along.

Rueda la pua hacia el lado del reloj, por el lado del boton, cuidadosamente empujando hacia adentro para separar el adhesivo y agrandar el espacio.

Acuérdate de no empujar la púa demasiado hacia adentro—es mas fácil de evitar esto rodando la púa en vez de arrastrar hacia alrededor.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.