Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 8

Passo 8
If desired, take out the six Philips screws to remove the LED circuit board from the bracket. Note that the rear circuit board is held back by the same screws. The LED board can easily be replaced by any other TIR6 board, any color (as far as I could check!)
  • If desired, take out the six Philips screws to remove the LED circuit board from the bracket.

  • Note that the rear circuit board is held back by the same screws.

  • The LED board can easily be replaced by any other TIR6 board, any color (as far as I could check!)

  • Note that there is cooling paste between the LED board and the bracket. Make sure you replace it.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.