Traduzione in corso passo 10
Passo 10
-
Replace and tighten the 22 mm lug nut with a ratcheting socket wrench.
-
Use a hammer and pair of vise grips to slide the wheel retaining pin back into place.
-
Follow the directions in step 2 in reverse order to reattach the brake cable.
-
Adjust the brake cable adjustment nut as necessary. The rear brake lever should be about 0.8" to 1.0" away from the handlebar when fully engaged.
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.