Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 3

Passo 3
Insert the spudger in between the lower casing and lower panel near the top right corner of the DSi. Carefully run the spudger along the edge of the outer casing, creating an opening between the body and the casing. Continue running the spudger around the body of the DSi until the majority of the lower case has been separated.
  • Insert the spudger in between the lower casing and lower panel near the top right corner of the DSi.

  • Carefully run the spudger along the edge of the outer casing, creating an opening between the body and the casing.

  • Continue running the spudger around the body of the DSi until the majority of the lower case has been separated.

DSiの右上角付近の、下部ケースと下部パネルの間にスパッジャーを差し込みます。

アウターケース端に沿ってスパッジャーを注意深くスライドして、本体とケースの間に開口部を作ります。

続けて、DSi本体の周りをスライドして、下部ケースの大部分を離します。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.