Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Inglese
Italiano

Traduzione in corso passo 3

Passo 3
Repeat for the left clip. Again, using a combination of a spudger and plastic opening tool to evenly pull the plastic clip up out of its channel in the heat sink. When there is enough of a gap between the fan and the heat sink, insert the spudger between the two, and pry up to remove the fan. When there is enough of a gap between the fan and the heat sink, insert the spudger between the two, and pry up to remove the fan.
  • Repeat for the left clip. Again, using a combination of a spudger and plastic opening tool to evenly pull the plastic clip up out of its channel in the heat sink.

  • When there is enough of a gap between the fan and the heat sink, insert the spudger between the two, and pry up to remove the fan.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.