Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 1

Passo 1
Gently pull up on the speaker cable connector to disconnect it from the front panel board. Be careful to pull up on the cable's connector and not the connector on the board. It's pretty flimsy and you might accidentally pull it off the board entirely. Use the flat end of a spudger to disconnect the antenna cable from the front panel board.
  • Gently pull up on the speaker cable connector to disconnect it from the front panel board.

  • Be careful to pull up on the cable's connector and not the connector on the board. It's pretty flimsy and you might accidentally pull it off the board entirely.

  • Use the flat end of a spudger to disconnect the antenna cable from the front panel board.

正面パネルの基板からスピーカーケーブルのコネクターの接続を外すため、ゆっくりと引き抜きます。

ケーブルコネクターを引き抜いてください。基板上のコネクターには触らないでください。コネクターはとても細いため、アクシデントで基板のコネクターを引き抜かない様ご注意ください。

スパッジャーの平面側先端を使って、アンテナケーブルを正面パネルの基板から接続を外します。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.