Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 8

Passo 8
Starting with the spudger you left in the crack, pry the upper case up to free the last few clips. Use a plastic opening tool to pop any straggler clips that weren't freed. Do not try to remove the upper case yet, as it is still connected by the front panel button cable.
  • Starting with the spudger you left in the crack, pry the upper case up to free the last few clips.

  • Use a plastic opening tool to pop any straggler clips that weren't freed.

  • Do not try to remove the upper case yet, as it is still connected by the front panel button cable.

  • Lift the upper case slightly and shift it to give access to the front panel board.

差し込んだままのスパッジャーを手に取り、幾つか残っているクリップを外すために上部ケースをこじ開けます。

プラスチック開口ツールを使って、まだ外れていないクリップを外します。

まだ上部ケースを完全に取り出さないでください。正面パネルのボタンケーブルが接続したままになっています。

正面パネルボードにアクセスできるように、上部ケースをわずかに持ち上げて少しずらします。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.