Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 5

Passo 5
If the printer is plugged in while the printhead is removed, the calibration data may be erased. Verify the printer is unplugged FIRST! When the printer is unplugged, lift the lever up and remove the printhead. Remove the printhead as shown. IMPORTANT: Leave the scanner lid open, or put a note near the printer.
Remove the printhead (See calibration warning)
  • If the printer is plugged in while the printhead is removed, the calibration data may be erased. Verify the printer is unplugged FIRST!

  • When the printer is unplugged, lift the lever up and remove the printhead.

  • Remove the printhead as shown. IMPORTANT: Leave the scanner lid open, or put a note near the printer.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.