Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 8

Passo 8
Since the calibration will be erased if the printer errors out, wait until the printhead is bone dry before installation. Printhead initialization uses 1/2 of your ink (non-XL). While the printhead will not be seen as "new", a unavoidable Printhead Preparation process must run. Once the printhead is satisfactorily dry, reinstall the printhed and ink in the reverse order they were removed. Plug the printer in when installed.
Reinstall the printhead and ink
  • Since the calibration will be erased if the printer errors out, wait until the printhead is bone dry before installation. Printhead initialization uses 1/2 of your ink (non-XL).

  • While the printhead will not be seen as "new", a unavoidable Printhead Preparation process must run.

  • Once the printhead is satisfactorily dry, reinstall the printhed and ink in the reverse order they were removed. Plug the printer in when installed.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.