Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 7

Passo 7
Only use alcohol as a final option. It may damage the printhead seals! IF USED, FLUSH WITH CLEAN WATER 3 TIMES. Recommended circulation times: Alcohol: 5-10 minutes. Without alcohol: 15 minutes.
Clean the printhead
  • Only use alcohol as a final option. It may damage the printhead seals! IF USED, FLUSH WITH CLEAN WATER 3 TIMES.

  • Recommended circulation times: Alcohol: 5-10 minutes. Without alcohol: 15 minutes.

  • The water will get lighter as the ink breaks down. An ultrasonic cleaner may help break stubborn clogs.

  • Put the printhead in hot water. Repeat until the printhead is reasonably clean. Change the cleaning water frequently.

  • Wipe the printhead contacts and nozzles by hand to ensure these areas are dry.

  • Before reinstalling the printhead, let it air dry for ~3-4 hours. Using a fan may speed this step up.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.