Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 14

Passo 14
Sadly, the Streak's LCD is permanently adhered to the front panel glass. However, that LCD/glass subassembly is held in the front panel with very strong 3M adhesive, and could be removed with enough careful prying. The LCD is bonded to the front panel glass to increase the strength of the device and sensitivity of the capacitive touch panel.
  • Sadly, the Streak's LCD is permanently adhered to the front panel glass. However, that LCD/glass subassembly is held in the front panel with very strong 3M adhesive, and could be removed with enough careful prying.

  • The LCD is bonded to the front panel glass to increase the strength of the device and sensitivity of the capacitive touch panel.

  • The inner face of the front panel assembly isn't all that exciting. The ear speaker and vibrator motor can be seen near its top edge.

  • The touchscreen ribbon cable houses:

  • Pixcir's controversial Tango S32 Touchscreen controller

  • Atmel's ATmega168P 8-bit AVR microcontroller

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.