Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 2

Passo 2
Gently open the zif connector that leads to the tips. Remove the tab, allowing access to the centre screw.
Removing the PCB
  • Gently open the zif connector that leads to the tips. Remove the tab, allowing access to the centre screw.

  • Using a T6 torx screwdriver, remove the centre screw. A nut on the back of the device will fall loose. The PCB can now be removed.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.