Salta al contenuto principale

Remplacement de la plaque de protection de l'écran LCD de l'iPad mini 3

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Francese

Traduzione in corso passo 28

Passo 28
iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: passo 0, immagine 1 di 2 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: passo 0, immagine 2 di 2
  • Remove the following Phillips #00 screws securing the LCD:

  • Three 3.3 mm screws

  • One 4.5 mm screw

  • If there is tape covering any LCD screws, peel it up with tweezers.

Retirez les vis cruciformes #00 suivantes qui fixent l'écran LCD :

Si un ruban adhésif recouvre les vis du LCD, décollez-le avec une pincette.

[* black] Remove the following Phillips #00 screws securing the LCD:
[* red] Three 3.3 mm screws
[* orange] One 4.5 mm screw
-[* icon_note] If there is tape covering any LCD screws, peel it up with tweezers.
+[* icon_note] If there is tape covering any LCD screws, peel it up with [product|IF145-020|tweezers].

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.