Salta al contenuto principale

iPad Mini 3 Wi-Fi LCD Shield Plate austauschen

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Tedesco

Traduzione in corso passo 24

Passo 24
iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: passo 0, immagine 1 di 2 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: passo 0, immagine 2 di 2
  • Be very careful with this step. Take your time and ensure the adhesive is hot and soft, and that you've been through all of the adhesive with an opening pick. Don't be afraid to stop and reheat.

  • At the top of the iPad opposite the home button, you should have a pick lodged into each corner. Twist the picks to lift the glass slightly, separating the last of the adhesive along all four edges.

  • If you encounter a significant amount of resistance, stop twisting. Leave the picks in place, reheat, and reapply the iOpener to the problem areas, and run a pick through the sticking point one more time.

Sei besonders vorsichtig bei diesem Schritt. Nimm dir Zeit und stelle sicher, dass der Kleber heiß und aufgeweicht ist. Achte außerdem darauf, dass du überall mit dem Plektrum lang gegangen bist, um den Kleber zu lösen. Hab keine Angst davor, hier zu stoppen und alles erneut zu erhitzen.

Am oberen Rand des iPad, gegenüber des Home Buttons, solltest du ein Plektrum an jeder Ecke befestigt haben. Drehe die Plektren um das Glas vorsichtig anzuheben; dabei löst du den letzten Rest des Klebers an allen vier Ecken.

Falls du einen starken Widerstand spürst, höre auf die Plektren zu drehen. Belasse sie wo sie sind, erhitze den iOpener erneut und lege ihn erneut auf die Problemzonen. Nun kannst du die Plektren durch die vorher schwierigen Bereiche ziehen.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.