Salta al contenuto principale

iPad Mini 3 Wi-Fi LCD Shield Plate Replacement

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Coreano

Traduzione in corso passo 22

Passo 22
iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: passo 0, immagine 1 di 3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: passo 0, immagine 2 di 3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: passo 0, immagine 3 di 3
  • Insert the tip of one last pick next to the previous step's pick, and slide it beneath the home button.

  • Stop about an inch from the right-hand side to avoid cutting the digitizer cable.

  • Insert the pick slightly deeper and work it back toward the home button.

  • Again, be sure to only slide the pick toward the center of the iPad when it is fully inserted; otherwise you may damage the antenna beneath the glass.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.