Salta al contenuto principale

Reemplazo de la placa del escudo LCD de una iPad Mini 3 Wi-Fi

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Spagnolo

Traduzione in corso passo 19

Passo 19
iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: passo 0, immagine 1 di 1
  • Leave the opening picks in place and reheat the iOpener.

  • Remember not to overheat the iOpener—no more than once every ten minutes.

  • Set the reheated iOpener on the home button end of the iPad and let it rest for a few minutes to soften the adhesive beneath the glass.

Deja las púas de apertura en su lugar y re calienta el iOpener.

Recuerda no sobrecalentar el iOpener--no mas de una vez cada diez minutos.

Ajusta el recalentador iOpener en el botón Home del iPad, y déjalo reposar por unos minutos para aflojar el adhesivo debajo del cristal.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.