Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Insert the tip of a small flathead screwdriver between the X clamp and its retaining post on the heat sink.
  • Insert the tip of a small flathead screwdriver between the X clamp and its retaining post on the heat sink.

  • Pry the X clamp away from its retaining post until it is lifted above the small groove cut into the retaining post.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.