Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Francese

Traduzione in corso passo 2

Passo 2
In the next few steps, you will use the tip of a spudger or the finger of an Xbox 360 opening tool to release the clips along the left and right sides of the bottom vent. Their locations are highlighted in red. You will insert the tool into the holes molded into the white plastic side case pieces. You will insert the tool into the holes molded into the white plastic side case pieces.
  • In the next few steps, you will use the tip of a spudger or the finger of an Xbox 360 opening tool to release the clips along the left and right sides of the bottom vent. Their locations are highlighted in red.

  • You will insert the tool into the holes molded into the white plastic side case pieces.

Pour les prochaines étapes, utilisez la pointe d'une spatule ou le doigt de l'outil pour ouvrir la Xbox 360 afin de détacher les clips le long des bords gauche et droit de la grille inférieure d'aération. Leur emplacement est indiqué en rouge.

Il s'agit d'insérer votre outil dans les trous moulés dans les dispositifs en plastique sur les bords de la pièce.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.