Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 10

Passo 10
After the motherboard assembly is out, the reset and power button covers can easily be removed. Unclipping a spring is all that's needed to remove the eject mechanism from the outer case. Ejecting a cartridge is accomplished by pushing two inclined planes underneath the cartridge until it pops up off the connector attached to the board.
  • After the motherboard assembly is out, the reset and power button covers can easily be removed.

  • Unclipping a spring is all that's needed to remove the eject mechanism from the outer case.

  • Ejecting a cartridge is accomplished by pushing two inclined planes underneath the cartridge until it pops up off the connector attached to the board.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.