Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Remove the two silver T6 Torx screws and white (or black) rubber bumpers from the right side of the hard drive.
  • Remove the two silver T6 Torx screws and white (or black) rubber bumpers from the right side of the hard drive.

  • You'll need to transfer these screws and bumpers to your new hard drive if you're changing drives. Make sure to put these on the right side of the drive when looking at the label with the SATA connector at the far end.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.