Salta al contenuto principale
Inglese
Giapponese

Traduzione in corso passo 3

Passo 3
Slide the point of a spudger behind the shield plate to gently peel the home button cable up off of the front panel. Be extremely cautious as you peel the home button cable. It is a fragile cable. If you feel more than slight resistance, stop and apply some heat from a hair dryer or iOpener to soften the adhesive, and then try again. Remove the LCD shield plate.
  • Slide the point of a spudger behind the shield plate to gently peel the home button cable up off of the front panel.

  • Be extremely cautious as you peel the home button cable. It is a fragile cable. If you feel more than slight resistance, stop and apply some heat from a hair dryer or iOpener to soften the adhesive, and then try again.

  • Remove the LCD shield plate.

スパッジャー先端をシールドプレートの裏に差し込み、スライドするように動かしながらフロントパネルからホームボタンケーブルを丁寧に剥がしていきます。

特に慎重になって、ホームボタンケーブルを剥がしてください。それは壊れやすいケーブルです。もしわずかでも抵抗を感じた場合、作業を中断し、ヘアドライヤーかiOpenerでゆっくり接着剤に熱を与え、やり直してください。

LCDシールドプレートを取り外します。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.