Salta al contenuto principale
Inglese
Francese

Traduzione in corso passo 3

Passo 3
Slide the point of a spudger behind the shield plate to gently peel the home button cable up off of the front panel. Be extremely cautious as you peel the home button cable. It is a fragile cable. If you feel more than slight resistance, stop and apply some heat from a hair dryer or iOpener to soften the adhesive, and then try again. Remove the LCD shield plate.
  • Slide the point of a spudger behind the shield plate to gently peel the home button cable up off of the front panel.

  • Be extremely cautious as you peel the home button cable. It is a fragile cable. If you feel more than slight resistance, stop and apply some heat from a hair dryer or iOpener to soften the adhesive, and then try again.

  • Remove the LCD shield plate.

Faites glisser une spatule (spudger) derrière la plaque de protection pour décoller la nappe du bouton home du panneau avant.

La nappe du bouton home est très fine, allez-y lentement et veillez à ne pas la déchirer. Si vous ressentez la moindre résistance, arrêtez-vous, chauffez le tout à l'aide d'un sèche cheveux ou d'un iOpener pour ramollir l'adhésif, puis réessayez.

Retirez la plaque de protection de l'écran LCD.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.