Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 4

Passo 4
The rubber membrane surrounding the home button is very thin and tears easily. Apply mild heat (with an iOpener, heat gun, or hair dryer) to soften the adhesive securing the home button membrane.
  • The rubber membrane surrounding the home button is very thin and tears easily.

  • Apply mild heat (with an iOpener, heat gun, or hair dryer) to soften the adhesive securing the home button membrane.

  • Using your fingertip, apply firm, constant pressure on the home button from the front side of the display assembly, until the membrane starts to separate from the front panel.

  • Do not push the home button all the way through—you only need to get a corner free so that you can pry it free with a spudger.

Con delicatezza, spingi via, sollevandolo dal pannello frontale, l'angolo superiore sinistro del pulsante home.

Non spingere fuori l'intero pulsante home: ti basta avere un solo angolo libero in modo da poter far leva con uno spudger.

Questa membrana è molto sottile. Se temi di stare rompendo il pulsante, applica un po' di calore (con un iOpener, una pistola termica o un asciugacapelli) e prova di nuovo.

[* icon_caution] The rubber membrane surrounding the home button is very thin and tears easily.
[*
black] Gently pushApply mild heat (with an [product|IF145-198-2|iOpener], heat gun, or hair dryer) to soften the top left corner ofadhesive securing the home button up awaymembrane.
[* black] Using your fingertip, apply firm, constant pressure on the home button from the front side of the display assembly, until the membrane starts to separate
from the front panel.
[* icon_caution] The rubber membrane surrounding the home button is very thin and tears easily.
[*
black] Gently pushApply mild heat (with an [product|IF145-198-2|iOpener], heat gun, or hair dryer) to soften the top left corner ofadhesive securing the home button up awaymembrane.
[* black] Using your fingertip, apply firm, constant pressure on the home button from the front side of the display assembly, until the membrane starts to separate
from the front panel.
[* icon_caution] Do not push the home button all the way through—you only need to get a corner free so that you can pry it free with a spudger.
[* icon_note] This membrane is very thin. If you feel like you're going to tear the button, apply mild heat (with an [product|IF145-198-2|iOpener], heat gun, or hair dryer) and try again.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.