Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Tedesco

Traduzione in corso passo 4

Passo 4
Carefully un-clip the antenna from the logic board near the PRAM battery. Gently de-route the antenna cable through the hole in the logic board. De-route the antenna cable from the clips on the logic board near the I/O bezel.
  • Carefully un-clip the antenna from the logic board near the PRAM battery.

  • Gently de-route the antenna cable through the hole in the logic board.

  • De-route the antenna cable from the clips on the logic board near the I/O bezel.

Löse die Antenne sorgfältig vom Logic Board in der Nähe der PRAM Batterie ab.

Fädle das Antennenkabel vorsichtig durch die Öffnung im Logic Board durch.

Hole das Antennenkabel aus den Klammern auf dem Logic Board in der Nähe der I/O Blende heraus.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.