Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 7

Passo 7
A couple more T5 Torx screws secure the rear inner case and logic board to the rest of the X10 Mini E10i. Disconnect the battery connector from the logic board with the flat end of a spudger. Pry up the SIM card socket connector and remove the rear inner case from the the logic board.
  • A couple more T5 Torx screws secure the rear inner case and logic board to the rest of the X10 Mini E10i.

  • Disconnect the battery connector from the logic board with the flat end of a spudger.

  • Pry up the SIM card socket connector and remove the rear inner case from the the logic board.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.