Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Tedesco

Traduzione in corso passo 1

Passo 1
Remove the following screws securing the logic board to the rear case:
  • Remove the following screws securing the logic board to the rear case:

  • Two 2.4 mm standoff screws

  • Standoff screws are best removed using a standoff screwdriver or bit.

  • In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.

  • One 2.1 mm Phillips #00 screw

Entferne die folgenden Kreuzschlitz-Schrauben, die das Logic Board am Rückgehäuse befestigen:

Zwei 2,4 mm Abstandsschrauben

Abstandsschrauben lassen sich am Besten mit einem Abstandsschrauben-Bit und Bithalter abschrauben.

Zur Not geht es auch mit einem kleinen Schlitz-Schraubendreher. Sei aber besonders vorsichtig und lasse ihn nicht abrutschen, dabei können umliegende Bauteile beschädigt werden.

Eine 2,1 mm Kreuzschlitz #00 Schraube

[* black] Remove the following screws securing the logic board to the rear case:
[* red] Two 2.4 mm standoff screws
- [* icon_note] Standoff screws are best removed using an [product|IF145-343|new_window=true] and [product|IF145-326|driver handle|new_window=true].
+ [* icon_note] Standoff screws are best removed using a [product|IF145-388-4|standoff screwdriver|new_window=true] or bit.
[* icon_caution] In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.
[* orange] One 2.1 mm Phillips #00 screw

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.