Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Tedesco

Traduzione in corso passo 4

Passo 4
Gently lay the logic board upside-down, with the top portion resting against the rear case of the iPhone. Use the flat end of a spudger to disconnect the antenna connector from its socket on the back of the logic board.
  • Gently lay the logic board upside-down, with the top portion resting against the rear case of the iPhone.

  • Use the flat end of a spudger to disconnect the antenna connector from its socket on the back of the logic board.

Lege das Logic Board vorsichtig falsch herum mit dem Oberteil auf dem Rückgehäuse ruhend ab.

Löse mit dem flachen Ende eines Spudgers den Anschluss der Antenne vom Sockel auf der Rückseite des Logic Boards.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.