Salta al contenuto principale

Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 32le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 7

Passo 7
The front panel is attached with clips, and there are several ribbon cables connecting it to the rest of the phone. Your goal here is to release the clips and open the phone only enough to disconnect the cables. Go slowly and carefully to avoid damage.
Start lifting the front panel assembly
  • The front panel is attached with clips, and there are several ribbon cables connecting it to the rest of the phone. Your goal here is to release the clips and open the phone only enough to disconnect the cables. Go slowly and carefully to avoid damage.

  • Make sure the suction cup is firmly attached to the front panel assembly near the home button.

  • While holding the iPhone down with one hand, pull up on the suction cup to slightly separate the home button end of the front panel from the rear case.

  • With a plastic opening tool, gently pry the edges of the rear case down, away from the front panel assembly, while you pull up with the suction cup.

  • Take your time and apply firm, constant force. The front panel assembly is a much tighter fit than on most other devices.

Il pannello frontale é attaccato con delle clip, e ci sono diversi cavi a nastro che lo connettono al resto del telefono. Qui l'obiettivo è quello di staccare le clip e aprire il telefono quanto basta per staccare i cavi. Procedi lentamente e con cautela per evitare danni.

Assicurati che la ventosa sia ben attaccata al al gruppo del pannello frontale vicino al pulsante home.

Mentre tieni fermo l'iPhone con una mano, tira la ventosa per separare lievemente il gruppo del pannello frontale dal case posteriore.

Con uno strumento di apertura in plastica, forza delicatamente verso il basso i bordi del case posteriore, allontanandoli dal gruppo display, mentre continui a tirare con la ventosa.

Prenditi tutto il tempo che ti serve e applica una forza decisa e costante. Il gruppo display è molto più a filo di quanto accade con la maggior parte dei dispositivi.

[title] Start lifting the front panel assembly
[* icon_caution] The front panel is attached with clips, and there are several ribbon cables connecting it to the rest of the phone. Your goal here is to release the clips and '''open the phone only enough to disconnect the cables'''. Go slowly and carefully to avoid damage.
[* icon_note] Make sure the suction cup is firmly attached to the front panel assembly near the home button.
[* black] While holding the iPhone down with one hand, pull up on the suction cup to slightly separate the home button end of the front panel from the rear case.
[* black] With a plastic opening tool, gently pry the edges of the rear case down, away from the front panel assembly, while you pull up with the suction cup.
[* icon_caution] Take your time and apply firm, constant force. The 5s front panel assembly is a much tighter fit than on most other devices.
[* icon_caution] Take your time and apply firm, constant force. The 5s front panel assembly is a much tighter fit than on most other devices.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.