Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 2

Passo 2
To remove the logic board from the body, use the #00 phillips head screwdriver and remove the 4mm silver screw from right side of the board. Next, rotate the camcorder so the front is facing you and remove the 4mm silver screw from the front panel. Carefully lift the logic board away from the camcorder.
  • To remove the logic board from the body, use the #00 phillips head screwdriver and remove the 4mm silver screw from right side of the board.

  • Next, rotate the camcorder so the front is facing you and remove the 4mm silver screw from the front panel.

  • Carefully lift the logic board away from the camcorder.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.