Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Remove the two 1.7 mm Phillips screws (one on top and one on bottom) securing the LCD shield plate to the display assembly. Remove the two 1.7 mm Phillips screws (one on top and one on bottom) securing the LCD shield plate to the display assembly.
  • Remove the two 1.7 mm Phillips screws (one on top and one on bottom) securing the LCD shield plate to the display assembly.

Rimuovi le due viti Phillips #00 da 1,7 mm ( una in alto e una nella parte inferiore che fissano sul pannello anteriore la piastra di schermatura dell'LCD.

[* red] Remove the two 1.7 mm Phillips #00 screws (one on top and one on bottom) securing the LCD shield plate to the display assembly.
[* red] Remove the two 1.7 mm Phillips #00 screws (one on top and one on bottom) securing the LCD shield plate to the display assembly.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.