Salta al contenuto principale

Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 2le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 5

Passo 5
The rubber gasket surrounding the home button is very thin and tears easily. Apply mild heat (with an iOpener, heat gun, or hair dryer) to soften the adhesive securing the home button gasket.
  • The rubber gasket surrounding the home button is very thin and tears easily.

  • Apply mild heat (with an iOpener, heat gun, or hair dryer) to soften the adhesive securing the home button gasket.

  • Using your fingertip, gently press up on the home button from the front side of the display assembly. Use firm, constant pressure to slowly separate the home button's rubber gasket from the front panel.

Usando la punta del dito, spingi gentilmente, ma non rimuovere, il pulsante home verso il lato opposto per liberare dal pannello frontale un bordo della guarnizione del pulsante home.

Non spingere a fondo sul pulsante home: ti basta sollevare un angolo, in modo da poter far leva liberamente con uno spudger.

Questa membrana in gomma che circonda il pulsante home è molto sottile. Per evitare di strappare la guarnizione, raccomandiamo di applicare localmente un minimo riscaldamento.

[* icon_caution] The rubber gasket surrounding the home button is very thin and tears easily.
[* black] Apply mild heat (with an [product|IF145-198-2|iOpener], heat gun, or hair dryer) to soften the adhesive securing the home button gasket.
[*
black] Using your fingertip, gently push, but do '''not''' remove,press up on the home button up from the oppositefront side to free one edge of the display assembly. Use firm, constant pressure to slowly separate the home buttonbutton's rubber gasket from the front panel.
[* icon_caution] Do '''not''' push the home button all the way through—you only need to get a corner free, so that you can pry it free with a spudger.
[* icon_note] The rubber gasket surrounding the home button is very thin. To prevent the gasket from tearing, we recommend applying a minimal amount of heat.
[* icon_caution] The rubber gasket surrounding the home button is very thin and tears easily.
[* black] Apply mild heat (with an [product|IF145-198-2|iOpener], heat gun, or hair dryer) to soften the adhesive securing the home button gasket.
[*
black] Using your fingertip, gently push, but do '''not''' remove,press up on the home button up from the oppositefront side to free one edge of the display assembly. Use firm, constant pressure to slowly separate the home buttonbutton's rubber gasket from the front panel.
[* icon_caution] Do '''not''' push the home button all the way through—you only need to get a corner free, so that you can pry it free with a spudger.
[* icon_note] The rubber gasket surrounding the home button is very thin. To prevent the gasket from tearing, we recommend applying a minimal amount of heat.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.