Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 1

Passo 1
The side brush motor is attached to the circuit board by one red and black twisted wire. Push down on the small white tab and pull to unplug it from the main board. If there is glue holding it on bObi, use your screwdriver to break it off.
  • The side brush motor is attached to the circuit board by one red and black twisted wire. Push down on the small white tab and pull to unplug it from the main board.

  • If there is glue holding it on bObi, use your screwdriver to break it off.

  • Remember to remove the screw and brush before trying to lift the motor out of bObi.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.