Traduci il passo n. 2 - bObi Robotic Vacuum Main Brush Motor Replacement - iFixit

Annulla

Torna alla Guida

Inglese

Italiano

Passaggio precedente Passo successivo

Traduzione in corso passo 2

Passo 2

To detach the brushes completely, unplug them from bObi.

The motor is on the bottom of the main brush attachment. Uninstall the four screws which secure it, then lift the motor out.

Remove the stabilizer attached to the motor’s end, closer to its circuit plug before pulling the whole piece out.

To detach the brushes completely, unplug them from bObi.
The motor is on the bottom of the main brush attachment. Uninstall the four screws which secure it, then lift the motor out.
Remove the stabilizer attached to the motor’s end, closer to its circuit plug before pulling the whole piece out.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.