Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Cinese

Traduzione in corso passo 3

Passo 3
Repeat for the second strip. Hold down the battery as you remove the second strip, or the strip may fling the battery when it separates from the case. If the adhesive breaks off underneath the battery and can't be retrieved, apply a few drops of high concentration (over 90%) isopropyl alcohol under the edge of the battery in the area of the broken adhesive strip(s).
  • Repeat for the second strip.

  • Hold down the battery as you remove the second strip, or the strip may fling the battery when it separates from the case.

  • If the adhesive breaks off underneath the battery and can't be retrieved, apply a few drops of high concentration (over 90%) isopropyl alcohol under the edge of the battery in the area of the broken adhesive strip(s).

  • Wait about one minute for the alcohol solution to weaken the adhesive. Use the flat end of a spudger to gently lift the battery.

  • Don't try to forcefully lever the battery out. If needed, apply a few more drops of alcohol to further weaken the adhesive. Never deform or puncture the battery with your pry tool.

  • Do not pry against the logic board or you may damage the phone.

  • Do not insert the spudger in the area between the volume down (-) button and the top edge of the battery, or you may damage the volume control cable lying underneath.

  • For more alternative methods when either of the adhesive strips broke off underneath the battery and could not be retrieved, continue with the next step below.

第二条胶条也重复相同的 操作。

当你移除第二个胶条的时候按住电池,否者胶条可能会在分开的时候把电池拉飞。

如果两个电池胶条你都能成功地弄下来(恭喜!),跳过接下来两个步骤。

如果有一个胶条在电池下面断了并且不能被拉出,继续下面的几个步骤

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.