Salta al contenuto principale

Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 23le guide che includono questo passo.

Inglese
Francese

Traduzione in corso passo 13

Passo 13
Make sure the battery is disconnected before you disconnect or reconnect the cable in this step. Use a spudger or a fingernail to disconnect the display data cable connector.
  • Make sure the battery is disconnected before you disconnect or reconnect the cable in this step.

  • Use a spudger or a fingernail to disconnect the display data cable connector.

  • When reassembling your phone, the display data cable may pop off its connector. This can result in white lines or a blank screen when powering your phone back on. If that happens, simply reconnect the cable and power cycle your phone. The best way to power cycle your phone is to disconnect and reconnect the battery connector.

Utilisez l'extrémité plate d'une spatule (spudger) pour déconnecter le connecteur de la nappe de gestion de l'écran.

Lors du remontage de votre téléphone, la nappe de gestion de l'écran peut se défaire du connecteur. Les conséquences peuvent être des lignes blanches ou un écran noir lorsque vous rallumez votre téléphone. Si c'est le cas, reconnectez simplement la nappe et débranchez et rebranchez votre téléphone. La meilleure façon de le faire est de déconnecter et reconnecter le connecteur de la batterie.

[* icon_caution] Make sure the battery is disconnected before you disconnect or reconnect the cable in this step.
[*
black] Use the flat end of a spudger or a fingernail to disconnect the display data cable connector.
[* icon_caution] Make sure the battery is disconnected before you disconnect or reconnect the cable in this step.
[*
black] Use the flat end of a spudger or a fingernail to disconnect the display data cable connector.
[* icon_reminder] When reassembling your phone, the display data cable may pop off its connector. This can result in white lines or a blank screen when powering your phone back on. If that happens, simply reconnect the cable and power cycle your phone. The best way to power cycle your phone is to [guide|29363|disconnect and reconnect the battery connector|stepid=69537].

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.