Salta al contenuto principale

Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 23le guide che includono questo passo.

Inglese
Francese

Traduzione in corso passo 9

Passo 9
Remove the following five Phillips screws securing the front panel assembly cable bracket:
Removing the front panel assembly cable bracket screws
  • Remove the following five Phillips screws securing the front panel assembly cable bracket:

  • Three 1.2 mm screws

  • One 1.7 mm screw

  • One 3.1 mm screw

  • Incorrect placement of these screws during reassembly will cause permanent damage to your iPhone's logic board.

Retirez les cinq vis cruciformes suivantes qui maintiennent le cache de la nappe d'écran :

Trois vis de 1,2 mm

Une vis de 1,7 mm

Une vis de 3,1 mm

Si ces vis sont placées au mauvais endroit lorsque vous remontez votre appareil, vous risquez de causer des dommages irréversibles à la carte mère de votre iPhone.

[title] Removing the front panel assembly cable bracket screws
[* black] Remove the following five Phillips screws securing the front panel assembly cable bracket:
[* red] Three 1.2 mm screws
[* orange] One 1.7 mm screw
[* yellow] One 3.1 mm screw
[* icon_caution] Incorrect placement of these screws during reassembly will cause permanent damage to your iPhone's logic board.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.