Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 2

Passo 2
The SATA data connector has a clip that must be pressed to allow removal. While pressing on the clip with your thumb, lift and disconnect the SATA data connector from its socket on the logic board. While pressing on the clip with your thumb, lift and disconnect the SATA data connector from its socket on the logic board.
  • The SATA data connector has a clip that must be pressed to allow removal.

  • While pressing on the clip with your thumb, lift and disconnect the SATA data connector from its socket on the logic board.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.