Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 4

Passo 4
Use the flat edge of a spudger to flip up the metal retaining bracket on the iSight camera cable connector. Pull the iSight camera cable straight out of its socket on the logic board. Do not use excessive force. This is a delicate connector that can be easily damaged.
  • Use the flat edge of a spudger to flip up the metal retaining bracket on the iSight camera cable connector.

  • Pull the iSight camera cable straight out of its socket on the logic board.

  • Do not use excessive force. This is a delicate connector that can be easily damaged.

スパイジャーのフラットエッジを使用して、iSightカメラケーブルコネクタの金属製保持ブラケットを持ち上げます。

ロジックボード上のソケットからiSight カメラケーブルをまっすぐ引き抜きます。

過剰な力を加えないでください。このコネクタはデリケートで、簡単にダメージが入ってしまいます。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.