Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Francese

Traduzione in corso passo 3

Passo 3
Use the flat end of a spudger or a fingernail to carefully pop the two digitizer cable connectors straight up from their sockets. To avoid damaging your iPad, pry only on the connectors themselves, not on the socket on the logic board. To avoid damaging your iPad, pry only on the connectors themselves, not on the socket on the logic board.
  • Use the flat end of a spudger or a fingernail to carefully pop the two digitizer cable connectors straight up from their sockets.

  • To avoid damaging your iPad, pry only on the connectors themselves, not on the socket on the logic board.

Utilisez l'extrémité plate d'un spudger ou votre ongle pour soulever délicatement les deux connecteurs de la nappe du la vitre tactile de leur prise.

Pour éviter d'endommager votre iPad, ne faites levier que sur les connecteurs mêmes et non sur la prise de la carte mère.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.