Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Spagnolo

Traduzione in corso passo 7

Passo 7
Push a plastic card between the right-most battery cell and the upper case, cutting the adhesive between the two. Throughout this procedure, be careful not to damage any of the battery cells with your tools. A damaged lithium-ion battery may leak dangerous chemicals and/or catch fire. Use only plastic pry tools.
  • Push a plastic card between the right-most battery cell and the upper case, cutting the adhesive between the two.

  • Throughout this procedure, be careful not to damage any of the battery cells with your tools. A damaged lithium-ion battery may leak dangerous chemicals and/or catch fire. Use only plastic pry tools.

  • When using the hot iOpener method, if you encounter significant resistance to prying, stop and use the iOpener to reheat the section you're working on.

Empuja una tarjeta de plástico entre la celda de la batería del extremo derecho y la caja superior, cortando el adhesivo entre los dos.

Durante este procedimiento, ten cuidado de no dañar cualquiera de las celdas de la batería con tus herramientas. Una batería de ion de litio podría perder sustancias químicas y/o prenderse fuego. Usa solamente herramientas de plástico para hacer palanca.

Cuando utilices el método de iOpener caliente, si encuentras resistencia significativa para hacer palanca deténte y usa el iOpener para volver a calentar la sección en la que estás trabajando.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.