Salta al contenuto principale
Inglese
Giapponese

Traduzione in corso passo 5

Passo 5
Keep the driver directly in line with the screw, with the shaft directly over the screw head. The driver and screw should be “on-axis,” forming a straight line. Holding the driver at an angle creates a poor fit between the driver and the screw head. Result: slippage and probable damage to the screw.
  • Keep the driver directly in line with the screw, with the shaft directly over the screw head. The driver and screw should be “on-axis,” forming a straight line.

  • Holding the driver at an angle creates a poor fit between the driver and the screw head. Result: slippage and probable damage to the screw.

  • Sometimes the screw itself needs to go into the surface at an angle. Keep the driver positioned correctly relative to the screw, rather than the surface it’s going into.

ドライバーをネジに対して垂直に保ってください。ドライバーとネジは一直線の状態にします。

ドライバーを垂直に保たなければ、ドライバーとネジ頭の間に隙間が生じてしまい、スリップによるダメージをネジに与えてしまいます。

時々、ネジ自体が表面に対してアングル入りで装着されていることがあります。ドライバーを表面ではなく、ネジに対して正しい角度で取り付けてください。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.