Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 5

Passo 5
For small coaxial connectors, like these U.FL antenna cable connectors, slide a thin, ESD-safe pry tool or tweezers under the wire until it's snug against the connector, and pry straight up from the board. To reinstall, hold the connectors in place and gently press them straight down. The connectors “snap” into their sockets much like the metal snaps on a jacket. To reinstall, hold the connectors in place and gently press them straight down. The connectors “snap” into their sockets much like the metal snaps on a jacket.
Coaxial Connectors
  • For small coaxial connectors, like these U.FL antenna cable connectors, slide a thin, ESD-safe pry tool or tweezers under the wire until it's snug against the connector, and pry straight up from the board.

  • To reinstall, hold the connectors in place and gently press them straight down. The connectors “snap” into their sockets much like the metal snaps on a jacket.

Per i connettori coassiali di piccole dimensioni, come i connettori dei cavi dell'antenna U.FL, fai scorrere uno strumento sottile, non elettrostatico, o una pinzetta sotto il filo fino a quando non intercetta il connettore e fai leva verso l'alto direttamente dalla scheda.

Per reinstallare, tieni i connettori in posizione e premili delicatamente verso il basso. I connettori "scattano" nelle loro prese in modo molto simile ai bottoni metallici di una giacca.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.