Aggiusta la tua roba

Diritto alla Riparazione

Store

Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte le 5guide che includono questo passo.

Torna alla Guida
Inglese
Italiano
Passaggio precedente Passo successivo

Traduzione in corso passo 2

Passo 2
Handle the card only by the edges.Do not touch its connectors or any of the components.Lift the card straight out from the connector to remove it, and insert it straight into the connector to install it.Do not rock the card from side to side and don’t force the card into the slot.Once the replacement card is installed, pull on it gently to check.

  • Handle the card only by the edges.Do not touch its connectors or any of the components.Lift the card straight out from the connector to remove it, and insert it straight into the connector to install it.Do not rock the card from side to side and don’t force the card into the slot.Once the replacement card is installed, pull on it gently to check.

  • 1) Release the small locking clip at the front of the card’s logic board connector by pushing the clip up toward the media shelf.

  • 2) Holding the card by the top corners, pull up the card and remove it from its expansion slot.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.