Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 2

Passo 2
Remove the two 5mm screws holding the power and 3.5mm jack PCB onto the rest of the device; you will need a Phillips #1 driver to do this. Lift the PCB away from the rest of the device. Lift the PCB away from the rest of the device.
  • Remove the two 5mm screws holding the power and 3.5mm jack PCB onto the rest of the device; you will need a Phillips #1 driver to do this.

  • Lift the PCB away from the rest of the device.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.